新闻资讯

新闻资讯

current position: Home > News Center > Company News

contact usContact Us

Suzhou Aotes Carbon New Materials Co., Ltd

Tel:+86 17621367917

Email: wsc8396@gmail.com

Address: Room 301, Building 49, No. 998 Pangnan Road, Wujiang District, Suzhou City, Jiangsu Province

Address: Rm 10, 22/f, The Cloud, 111 Tung Chau Street, Tai Kok Tsui,Hong Kong


Hot press molding: why aviation composite materials cannot do without it for a long time?

2026-09-03 14:42:48
times

More and more structures on a modern airplane are adopting carbon fiber reinforced composite materials. But the transformation of carbon fiber from a "material" to a structural component that can truly withstand flight loads is not simply a combination of fibers and resin.


In the field of aviation composite material manufacturing, there is a device that has long occupied an important position - Autoclave. It looks like a huge pressure vessel, but in fact it undertakes one of the key tasks in the composite material forming process: simultaneously applying controllable temperature, pressure, and vacuum environment to the material to complete compaction, infiltration, and curing of the prepreg.


So, why do aerospace composite materials place so much emphasis on hot press cans?


1、 What is a hot press can?


Simply put, a hot press can be understood as a high-performance composite material curing equipment that can simultaneously control temperature, pressure, and vacuum


Typical aviation composite material manufacturing typically starts with prepreg. The carbon fiber has been pre impregnated with resin that has not yet fully cured, and then cut and layered according to the design requirements. After the layering is completed, the material is covered on the mold and a complete vacuum bag system is formed through release cloth, isolation film, adhesive absorbing material, breathable material, and vacuum bag.


Subsequently, the entire component enters the hot press tank. In the hot press tank, the temperature rises according to a predetermined curve, while applying pressure to the outside of the vacuum bag to evenly compact the layer. After the prescribed heating, insulation, pressurization, and cooling processes, the resin is cured and then forms composite structural components.


Therefore, the true value of a hot press tank is not "heating the material", but rather: allowing the material to be molded in a controlled temperature, pressure, and vacuum environment.


image.png


2、 Why do aviation composite materials require special "pressure"?


This is the key to understanding hot press cans.


What are the fears inside composite materials? One important issue is porosity. During the process of laying prepreg, there may inevitably be air between layers, and the resin may also produce volatiles during the heating and curing process. If these gases are not effectively expelled, internal pores may form. Pores can affect the structural quality and mechanical properties of composite materials, so the control of manufacturing defects in aviation structures is very strict.


The advantage of a hot press tank is that it can further apply external pressure on the basis of vacuum. Vacuum helps to eliminate air and volatile substances inside the layer, while the pressure of the hot press tank further compacts the fiber bed, promotes resin flow, and interlayer bonding. Research has shown that both vacuum and autoclave pressure can affect the pore content of composite materials, with an increase in pressure significantly promoting pore reduction.


Therefore, vacuum is responsible for "pumping", pressure is responsible for "pressing", and temperature is responsible for "making the resin flow and solidify". The combination of the three forms the core logic of the hot press can process.




image.png


3、 Why can hot press cans produce high-quality composite materials?


Aerospace composite materials not only require 'strength', but also stability. If there are significant differences within different batches of products using the same material, even if the laboratory performance is good, it is difficult to directly use it for critical aviation structures.


Hot press cans can be programmed to control the molding process. The temperature can change according to the set curve, the pressure can be adjusted according to the process requirements, and the vacuum state can also be continuously monitored. At the same time, the prepreg itself has already pre controlled the fibers and resin. Therefore, from material preparation, layering, to vacuum bag assembly, and then to hot press curing, the entire process forms a relatively complete quality control system.


This is also an important reason for the long-term use of hot press can prepreg technology in the manufacturing of high-performance aerospace composite materials. Related studies suggest that hot press cans can achieve higher fiber volume fraction and lower pore content, and have good size and quality control capabilities.


image.png


4、 How is an aviation composite material "put into the tank"?


It's not just about putting a component inside a hot press can. Before entering the hot press tank, complex layering and vacuum bag assembly need to be completed.


Normally, the prepreg is first laid on the surface of the mold according to the design requirements. Fiber layers in different directions are arranged in the prescribed order, such as 0 °, ± 45 °, and 90 ° layer combinations, to meet the load requirements of the structure in different directions.


Afterwards, corresponding auxiliary materials are set on the surface of the material and a sealed space is formed through a vacuum bag. After vacuuming, the layer is pressed tightly onto the mold. The entire system enters the hot press tank. This means that the hot press tank does not work independently. The materials, layers, molds, vacuum bags, and hot press cans must be designed as a whole for the process. Any problem at any stage may affect the quality of the product.


image.png


5、 Why has the aviation industry long attached importance to hot press tanks?


The aviation structure has a very special characteristic: it needs to be both lightweight and reliable. Reducing structural weight can bring benefits in terms of fuel efficiency, range, and payload, but aviation structures must also meet strict safety and airworthiness requirements.


The FAA's AC 20-107B "Composite Aircraft Structure" provides guidance on airworthiness compliance for the design, manufacturing, and maintenance of composite aircraft structures. Therefore, the pursuit of aviation composite material manufacturing is not simply "high strength", but stability, repeatability, and verifiability.


After long-term development, the hot press can process has formed a mature material, equipment, and quality control system, which is also an important reason for its long-term application in the manufacturing of aviation composite materials.


6、 Is there no disadvantage to hot press cans?


Of course not. A major issue is high cost. The hot press tank itself is a large-scale pressure equipment that requires high equipment investment and consumes a large amount of energy during operation.


In addition, the size of the hot press can also limit the size of the parts that can be manufactured. If the parts are very large, a larger hot press tank is required, which will further increase equipment investment and operating costs.


In addition, traditional prepreg layup also has high manual and process requirements. Therefore, for fields such as automobiles and wind power that emphasize production efficiency and cost control, the traditional aviation style hot press can process may not necessarily be an economical choice.


Related studies have also pointed out that hot press tanks have problems such as high equipment investment, high energy consumption, and long manufacturing cycles, which is an important reason why non hot press tank (OOA) technology has received attention in recent years.


7、 Aerospace composite materials are getting rid of their dependence on hot press cans


This is the change that must be seen today. In the past, there was a very close relationship between high-performance aerospace composite materials and hot press cans. But with the continuous development of materials and processes, OOA (Out of Autoclave) prepreg, RTM, and other low-cost manufacturing technologies are constantly maturing.


The goal of OOA prepreg is to obtain composite material structures that meet the requirements through special material systems and vacuum processes without using traditional high-pressure hot pressing tanks. For example, Hexcel currently offers prepreg products for non hot press can manufacturing, and its application direction covers areas such as aviation structures. This does not mean that the hot press tank is outdated.


On the contrary, it indicates that there is a new change in the manufacturing of aviation composite materials: from "pursuing higher performance" to "comprehensive balance of performance, cost, efficiency, and manufacturing scale".


8、 Will hot press cans be phased out in the future?


In the short term, it is difficult to make such a simple judgment. For some composite parts with extremely high requirements for performance consistency, quality control, and structural reliability, hot press cans still have important value.

On the other hand, with the increasing size of aircraft structures and the growing demands for efficiency and cost in aviation manufacturing, non hot press tank processes, automatic placement, rapid curing resins, and advanced molding technologies are all rapidly developing.


The more likely scenario in the future is not "hot press cans replacing other processes" or "other processes completely replacing hot press cans", but rather different processes dividing labor based on part size, performance requirements, output, and cost.


Conclusion


The reason why the hot press can become an important equipment for aviation composite material manufacturing for a long time is not because it is "magical", but because it solves several core problems in composite material manufacturing: how to control temperature? How to apply pressure? How to reduce porosity? How to fully infiltrate and cure resin? How to obtain stable and reproducible product quality? From pre impregnated material layering, to vacuum bagging, to hot press curing, every step is actually serving the structural performance.

Today, aerospace composite materials are entering a new stage of automation, digitization, and low-cost manufacturing. Hot press cans are still important, but they are no longer the answer. What is truly worth paying attention to may not be whether the hot press can disappear, but whether the next generation of aviation composite material manufacturing can truly reduce manufacturing costs and production cycles while maintaining high performance and reliability. This will determine whether composite materials can further move from the high-end aviation field to a broader advanced manufacturing market.


Note: The content of this article is for scientific sharing only and does not constitute any investment advice, application guidance, or commercial promotion purposes. If some of the images and materials in the article involve copyright, infringement, or other issues, please contact us in a timely manner, and we will verify and handle them in a timely manner. Thank you for your understanding and support!

Recently Viewed:

  • menu

Copyright©Suzhou Aotes Carbon New Materials  

Co., Ltd. All rights reserved.

Privacy Notice

Cantact Us

Tel:+86 17621367917

Email: wsc8396@gmail.com

Address: Room 301, Building 49, 

No. 998 Pangnan Road, Wujiang 

District, Suzhou City, Jiangsu Province

Address: Rm 10, 22/f, The Cloud, 111 Tung Chau Street, Tai Kok Tsui,Hong Kong

Hong Kong Aotesi Carbon Limited

Address: Room 10, 22nd Floor, Cloud End, 111 Tung Chau Street, Tai Kok Tsui, Hong Kong



WeChat public account

Copyright © Suzhou Aotes Carbon New Materials Co., Ltd All rights reserved Site map | RSS | XML
#
Online Service

x